110 trigger

[Tom Thomson]

I recently bought a 110 FP in 308 and the trigger does not feel right.
Pull is just over 5 lbs with the trigger spring set at he loosest click (another half turn and it is slack). Also there is almost no travel and it feels a bit "crunchy".
What should I look for?
tommyt

[olddav]

Is it a wire spring or coil spring?

[Tom Thomson]

It's a wire spring and I forgot to mention it's pre Accu-trigger - ser #F406---

[olddav]

Is it a three screw or two screw trigger? Either way you can replace the wire spring with one made of piano wire .040 or cut one from a Buzz Bait lure. You may want to polish the sear as well. That should produce a 3lb or better trigger. Worse comes to worse you could replace the factory trigger with a Timney, Rifle Basix or a SSS trigger.

[jonbearman]

Being that old it is a 3 screw I would think and there are tutorials on how to set them properly. Google it or go to the home page under the articles.