Savage Waranty ?

[gr8lakes]

Hey guys

long time reader, first time poster.



I just purchased a Savage 10 fcp-sr about 2 weeks ago, and noticed that it was just a bit harder to camber a round than my other savage in the same caliber
and after firing the rounds, some of the cases would get kind of stuck in the chamber where I needed to tap on my bolt handle to extract.
I also noticed a lot of brass scrapings on my mag.

Any who after looking down the receiver with a light and camera it appears there is a ding about an 1/8 inch long just at the corner of the chamber opening
and its scraping material from the case, and also making it hard to eject.

Any one else ever have this.
How is Savages warranty.
Will the replace the barrel, or just try and re chamber it.
any one know about how long this kind of service takes.


Thanks
and sorry for rambling

http://s4.postimg.org/uiav4apax/Chamber.jpg (http://postimg.org/image/uiav4apax/)

[wbm]

Definitely would send that one back. Don't know what their turn-around time is. Give them a call.

[GaCop]

Yup, definitely a barrel replacement from Savage.