View Full Version : Rebarrel a .308 Model 11 Trophy Hunter with a .221 Fireball Barrel
Rasty1
03-12-2015, 06:52 PM
The question I have as NOB is can I rebarrel my .308 Model 11 with an aftermarket .221 Fireball barrel?
Both are short action, but will the stock bolt eject the .221 Fireball brass?
Any other things I need to consider?
Any advise is greatly appreciated.
Hotolds442
03-12-2015, 07:32 PM
No. You will need a new bolt face for the .223 family of cartridges. You will also need a magazine box and follower for the .223 based cartridges.
sharpshooter
03-13-2015, 12:34 AM
It won't feed from a magazine.
short round
03-13-2015, 02:19 AM
It may not eject Fireball case, will work fine as single shot, remove ejector & pluck case off bolt head.
Rasty1
03-13-2015, 08:20 AM
Thanks for the replies, been trying to get a .221 fireball and they are hard to find, so figured I would rework this .308 I have. Have to think about doing it. It doesn't matter if it is a single feeder, its a squirrel gun and I shoot single shot anyway.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.