B&C Medalist Varmint/Tactical M40 Stocks available for pre-order

[Marine24]

Stocky Stocks just posted this on their website:

https://www.stockysstocks.com/stocks-by-brand/bell-carlson/varmint-tactical/bell-carlson-tactical-medalist-style-4-long-range-remington-700-short-action-1001-long-action-stock.html

[Ralfus]

The "Varmint/Tactical" and the "M40 Tactical" are two different stocks.

[Marine24]

Okay, let's use the official name:

Bell & Carlson Tactical Medalist Style 4 M40 Long Range Remington 700 BDL, Savage 10/12

[FW Conch]

I have a Tactical Medalist, and these stocks are great, as far as bedding the action is concerned. The one piece bedding block/full skeleton can only be rivaled by a chassis system. I consider them to be a bargin price. :-)

[Marine24]

Have to agree. I've used their Medalist line on my Weatherby Mark V in 257 Weatherby. Dropped right in and accuracy improvement was a nice plus as well. I'm partial to Manners Stocks, but with their new M40 line for Savage SA, that may change.

[Rmga1982]

I have been looking at this stock since I found it. Should there be a problem using this stock with an 11vt from dicks???? Any help would be appreciated thanks in advance

[rmauch]

Hey guys needing a little help. I have a Savage HH .308 and was looking at the B&C M40 stock that is coming out. The obvious problem I need savage factory bottom metal and mags for the stock.
Is this even possible to put the HH barrel and action into the B&C M40 and convert to it to use factory savage mags. If so can someone help with part numbers needed or aserial number to find the items needed on savages site.

[mikgarus]

Hey guys needing a little help. I have a Savage HH .308 and was looking at the B&C M40 stock that is coming out. The obvious problem I need savage factory bottom metal and mags for the stock.
Is this even possible to put the HH barrel and action into the B&C M40and convert to it to use factory savage mags. If so can someone help with part numbers needed or aserial number to find the items needed on savages site.

+1!

[rc109a]

I just want to know when it is coming out. I seen the pre-order, but no eta.

[clintsrv]

Yes it's definetly doable and likely a must as these are inlet for factory bottom.
CDI and AM will drop in too. They use AI mags.
Are you wanting DBM or HFP? I can supply numbers for SS HFP. I may still have a rifle that will give number for DBM.
Pm if interested in any. May be tomorrow but I'll get info to you. Been a long day.

[rmauch]

I sent you a message. Thanks for the help