SICARIO
02-25-2015, 07:06 PM
I just picked up a doner model 11 rifle for a build. It came with the bottom bolt release. There are aome stock and bottom metal options out there for the bottom release, but they're limited. I decided to convert mine over to a top release. It does require machining the side but it's pretty straight forward. I had a long action receiver to pull dimensions from.
http://i561.photobucket.com/albums/ss60/travisvgray/612DA8AB-354A-4432-92D8-92225011AB18_zpszrqcknzm.jpg
http://i561.photobucket.com/albums/ss60/travisvgray/F23DD26D-7829-42DA-95D8-09EA8AEA9370_zpsuwcacddc.jpg
http://i561.photobucket.com/albums/ss60/travisvgray/45C447DE-2BE9-4D7E-968A-133F6B8DBD99_zpsjvfw63pp.jpg
http://i561.photobucket.com/albums/ss60/travisvgray/98D3B12F-176B-4F17-B9FE-127828319667_zpsydhbe2kq.jpg
http://i561.photobucket.com/albums/ss60/travisvgray/612DA8AB-354A-4432-92D8-92225011AB18_zpszrqcknzm.jpg
http://i561.photobucket.com/albums/ss60/travisvgray/F23DD26D-7829-42DA-95D8-09EA8AEA9370_zpsuwcacddc.jpg
http://i561.photobucket.com/albums/ss60/travisvgray/45C447DE-2BE9-4D7E-968A-133F6B8DBD99_zpsjvfw63pp.jpg
http://i561.photobucket.com/albums/ss60/travisvgray/98D3B12F-176B-4F17-B9FE-127828319667_zpsydhbe2kq.jpg