Shank size

[ole95]

Basailly what I'm interested is what rifle pull off barrels will fit the Striker I know they would have to be cut to pistol leanth
Thanks

[geargrinder]

Small shank unless it is a WSM Striker.

[ole95]

Ok thanks so any small shank from any Savage rifle will fit a standard Striker
taking in fact of only using short action cal.

[Jamie]

Use can use any of the small shanks on them, even long action cartridges.

[bootsmcguire]

Yup you can use Long action stuff like 30-06, 25-06, etc., but they obviously wont feed from your magazine. You also may have to pull the bolt to remove a loaded round, but fired brass will eject fine. You should be able to also use things like 7RM, 300WM, etc., but you will need to acquire a SA-Mag bolt head for those and same as above, single shot only, remove bolt to remove loaded round.

[ole95]

Yep on the feeding single shot I have a striker in 6.5 x 284 that to seat the bullet were I like they wont fit the magazine
I'm adding a single shot bench rest follower to it.
my next build more than likly be a Mcgrown prefit in 6br. But I'm running across a few interesting pull off barrels that I could end up using for this or another project
thanks