PDA

View Full Version : dipped my axis


blink
02-16-2015, 10:22 PM
not perfect but not too bad either...still perfecting the process.:eagerness:

http://i34.photobucket.com/albums/d147/blinklit/IMG_0078.jpg (http://s34.photobucket.com/user/blinklit/media/IMG_0078.jpg.html)

http://i34.photobucket.com/albums/d147/blinklit/IMG_0116.jpg (http://s34.photobucket.com/user/blinklit/media/IMG_0116.jpg.html)

http://i34.photobucket.com/albums/d147/blinklit/IMG_0118.jpg (http://s34.photobucket.com/user/blinklit/media/IMG_0118.jpg.html)
Hotolds442
02-16-2015, 10:29 PM
Not bad at all!
03mossy
02-16-2015, 11:14 PM
Pretty cool! How'd you do it?
Rosco
02-16-2015, 11:54 PM
That looks great!! Will be doing some this myself here soon, I hope it comes out that well done.
DrThunder88
02-17-2015, 01:15 AM
Psychedelic and functional. Very nicely done!
blink
02-17-2015, 12:30 PM
Pretty cool! How'd you do it?

there are lots of vids on youtube,this is the best one to start with.

swirling (https://www.youtube.com/watch?v=UHqPkkSpLZk)
blink
02-17-2015, 12:41 PM
i used testors oil based flat lacquer paint,couldn't find anything else here in canada :p
i would thin it with a few drops of thinner though.getting better with experience.
here was my first attempt with another stock......didn't mix well enough and decided to do the barrel and receiver too but still think it's cool looking.:rockon:

http://i34.photobucket.com/albums/d147/blinklit/IMG_0109.jpg (http://s34.photobucket.com/user/blinklit/media/IMG_0109.jpg.html)

http://i34.photobucket.com/albums/d147/blinklit/IMG_0114.jpg (http://s34.photobucket.com/user/blinklit/media/IMG_0114.jpg.html)

http://i34.photobucket.com/albums/d147/blinklit/IMG_0112.jpg (http://s34.photobucket.com/user/blinklit/media/IMG_0112.jpg.html)
03mossy
02-17-2015, 01:33 PM
Just Watched The video....mind blown!!!!
TXCOONDOG
02-17-2015, 08:01 PM
Nice work!
Jay24bal
02-18-2015, 12:07 PM
How durable is it? Has the paint on the first one you did held up to regular use/cleaning?

Very cool project, and you did a great job.
blink
02-18-2015, 08:08 PM
How durable is it? Has the paint on the first one you did held up to regular use/cleaning?

Very cool project, and you did a great job.

unknown!i would imagine it will hold up good after being cleared.i use rem oil to clean my firearms and that has no affect on it.
devildogandboy
02-26-2015, 07:22 PM
nice camo job. can you use other brand paints and get the same effect?

Bruce
blink
02-26-2015, 10:13 PM
yes,as long as it is lacquer or oil based paint.
blink
02-26-2015, 10:15 PM
Just Watched The video....mind blown!!!!

it is cool,especially with a clear container,you can watch it actually change as it's dipped.