View Full Version : model 10 precision rifle assembly
Brian T
05-06-2010, 07:35 PM
I removed the action from the stock to adjust the trigger. When trying to reassemble I find that when I tighten the rear action screw the bolt removel buttom remains locked to the rear. Any assembly hints?
rjtfroggy
05-06-2010, 09:22 PM
loosen the screws they are probably a little to tight.
82boy
05-06-2010, 11:56 PM
The accu-stock guns are a bit of a PIA to get back together. To start, make sure the accu-wedge is as loose as it will go. Place an allen wrench on the accu-wedge screw and push it up to the top, then place the action in the stock. Then tighten the screws.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.