Magazine Well Question

[Hobble]

Hi there. A while back I bought myself a 111 Trophy Hunter XP. Well, I ended up breaking the stock so I got myself I Hogue stock for it, I got the stock, popped the magazine well out of the broken stock, popped it into the Hogue, put the magazine in, and I was ready to go. Well, now you see I'm looking to get myself a 116 FCSS in .338 Win Mag off of Buds gun shop, and when I get it what I want to do is take the Hogue off the 111 and put it on the 116 (it is a heavy stock, so I want to use to help cut back on recoil) and take the Accustock from the 116 and put it on the 111. But what I am wondering is, does the 116 have a magazine well that will pop out like the 111's, or does it have an non-removable molded well? And if it does have a molded well will the magazine that goes with it work with the non-molded well that is the Hogue? Sorry if this is any sort of confusing.

[Hotolds442]

It will most likely have the removable bottom metal. The recoil lugs are different for the AccuStock models, so you would have to remove the barrels and swap the lugs in order to make both swaps work.

[Hobble]

The Hogue wouldn't go on the 116 as is?

[Hotolds442]

The 116 would go into the Hogue, although the side to side clearance at the recoil lug would be oversized. The 111 wouldn't drop into the Accu-Stock. The recoil lug would be too wide.