Removing the stock from a model 10 precision carbine & trigger issue

[Brian T]

I have removed the bolt, magazine and the three screws from the stock. The action will not drop free. Am I missing a step or is this normal? I do not want to force anything.

Also on occasion when I work the bolt it will not cock, I have to raise the bolt handle once or twice, if I increase the trigger pull will it solve this?

[Tch2fly]

I have removed the bolt, magazine and the three screws from the stock. The action will not drop free. Am I missing a step or is this normal? I do not want to force anything.



I'll taking a stab ... that rifle should have the accustock so you pulled three screws (2 action and 1 for the trigger guard) and loosened the very front screw (wedge screw) correct?
You didn't miss the action screw "hidden" under the bolt removal button?

[Brian T]

thanks that worked

[Tch2fly]

No problem.
Keep in mind the very front screw is only loosened to remove the stock, if you pulled it out then you will need to re-thread the wedge back on the screw before you put the action back in the stock.

This thread discusses the proper torque method to reseat the action
http://savageshooters.com/SavageForum/index.php/topic,29836.0.html