View Full Version : Removing the stock from a model 10 precision carbine & trigger issue
Brian T
05-05-2010, 07:11 PM
I have removed the bolt, magazine and the three screws from the stock. The action will not drop free. Am I missing a step or is this normal? I do not want to force anything.
Also on occasion when I work the bolt it will not cock, I have to raise the bolt handle once or twice, if I increase the trigger pull will it solve this?
Tch2fly
05-05-2010, 07:32 PM
I have removed the bolt, magazine and the three screws from the stock. The action will not drop free. Am I missing a step or is this normal? I do not want to force anything.
I'll taking a stab ... that rifle should have the accustock so you pulled three screws (2 action and 1 for the trigger guard) and loosened the very front screw (wedge screw) correct?
You didn't miss the action screw "hidden" under the bolt removal button?
Brian T
05-05-2010, 07:53 PM
thanks that worked
Tch2fly
05-05-2010, 08:06 PM
No problem.
Keep in mind the very front screw is only loosened to remove the stock, if you pulled it out then you will need to re-thread the wedge back on the screw before you put the action back in the stock.
This thread discusses the proper torque method to reseat the action
http://savageshooters.com/SavageForum/index.php/topic,29836.0.html
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.