RentonXD1
02-02-2015, 04:42 PM
I have a model 11VT chambered in 223. It originally comes with a DBM but I have since purchased a B&C medalist stock with a Blind mag. Now I took apart my stock magazine and am only using the box and follower. I also have the "L" bracket to keep the box secured in the stock. Now my problem is that when I insert the bolt it drags on the lips of the magazine and is marking up the bolt and very hard to cycle. The box and follower are as far as I can tell all the way fitted into the stock as can be. I've applied pressure to the lips and will not seat any further down. Not really sure what else my options are or if any of you have encountered this same issue. Any help would be much appreciated. I've been having issues since I bought the stock for my rifle. My other issue was finding action screws but I finally got that taken care off.
Mike.
Mike.