quick bedding ?

[oldtimer48]

when using the pc-7 for bedding the reciever on my savage 110 i used 1/4"x28 all thread studs wrap with tape and i believe the tape got hung up inside the pillar not letting the reciever seat fully in the stock, the front pillar on my savage 110 is about 1/8" below the pc-7 bedding. do i need to dremel the bedding down to it reaches the top of the pillar and redo?

[sharpshooter]

Yep...start over. If all you have is all thread, fill the threads completely full of wax or shoe polish and then cover them with a drinking straw.Wax the dirinking straw too.

[oldtimer48]

thanks sharp shooter for taking your time to write back to me and thanks for the tips as well.

[cornstalker]

I thought about using PC-7 but got sceered. How hard is it to machine that stuff?

[oldtimer48]

it is not hard with a dremel and a wheel just got to be extra careful not grind out anything you don't want to hit i been using it at lower speeds 6-7 so it doesn't vibrate as much

[oldtimer48]

i was going to pick up some cheap lipstick at wallmart and mark either the bedding or the reciever and see where it is making contact

[Uncle Jack]

i was going to pick up some cheap lipstick at wallmart and mark either the bedding or the reciever and see where it is making contact


I haven't been involved with that kind of bedding since I was in college.

uj

[cornstalker]

Another clever trick. Now I can raid the old lady's makeup box instead of buying bedding black.

Keep 'em coming. So far I have everything in stock....

[dcloco]

Thought PC-7 or PC11 might not adhere to plastic???