Accutrigger enhancement ?

[olddav]

I read this post this morning and it made my head hurt. Now it makes sense, thanks for the additional info.

[savage2014]

This question was originally asked in the AXIS section, hence all the confusion.
The red blade accutrigger denotes the 6 oz. version that came on model 12 target actions. The red blade is only an indicator, itself has nothing to do with the light trigger pull. The lighter trigger pull comes from the sear, which has a different engagement angle and is identified by the dimple under the thumb piece. The red blade accutrigger will fit on the Axis, however the mating sear from the model 12 will not. The Axis sear is totally different.

Thanks for clearing things up. I don't know why this question got moved to 110 series. I thought I posted it on the AXIS forum...

[Mach2]

Save those springs from cigarette lighters. You'd be surprised where they work.

[Steelhead]

If you replace the standard Accutrigger spring with a varmint/target Accutrigger spring you can adjust pull weight down to around 1.5#. I believe GunShack stocks them for sell.
I went this route and it worked out well.

[Willoughby]

I looked back for my previous post on at mod but there gone now

[savage2014]

My spring is here and I can feel a big difference on the trigger pull even by just dry firing. Thanks again @jpdown

the one on the right is the original..

https://farm8.staticflickr.com/7309/16429636521_40523fd924_b.jpg

[strut64]

I bought a target spring from gunshack and it worked well. Good luck