magazine conversion questions

[acder]

I have an early 110 (30 06 stagger feed) that I am having rebarrelled to 308. It has the internal magazine. I would like to convert to detachable AI type mags with an aftermarket kit, or if that's not possible savage type mags. Possible to do? Any adviçe welcomed. Thanks.

http://i106.photobucket.com/albums/m250/acder/20150116_103843.jpg

[Balljoint]

First you must know what the screw spacing is then you can order the bottom metal

[acder]

First you must know what the screw spacing is then you can order the bottom metal

Its 5 inches. One thing I am unsure of is that since the ejector is mounted to the rear of the magazine block how would that work with a detachable mag bottom metal set up?

[Robinhood]

Balljoint, All long actions have the same screw spacing.

[acder]

OK I think I have answered my own question. I have a pre 66 rifle with old style ejector attached to the mag box and I think I would need to switch to a newer style bolt with built in ejector.So how hard would that be?