switching from 223 to 308

[foxx]

I have never done this before. I am switching new model 11 from .223 to .308.

I think I need standard front baffle # 103322 and s/a short std bolt head #104876

What else, if anything?
Also, is there anything I need to know before I start? tips/suggestions/warnings?

Thanks.

[Robinhood]

Magazine, follower and barrel.

[wbm]

That is all you need for the action but you will need a difference magazine setup.

[jonbearman]

You will need a go gage to set your headspace.

[foxx]

Yeah, yeah, yeah. :)

I have all that, already. :) i'm talking about the action.

I guess I kinda left that open a bit, didn't I?

Thanks again.

[homefrontsniper]

Go with 6.5 creedmoor!

[foxx]

I might do that, Home. I'm not necessarily going to .308. That was just a hypothetical confirming what I needed as far as parts go.

One last question, just to be sure:
If I go 6.5 creed, does that mean I need a 6.5 creed barrel, too? ;)

[homefrontsniper]

27" MTU KRIEGER 1in 8"

[wbm]

If I go 6.5 creed, does that mean I need a 6.5 creed barrel, too?

Depends on how you define "need". :cool:

[BoilerUP]

27" MTU KRIEGER 1in 8"

I'll never understand the fascination with Dana 44 rifle barrels...

[Hotolds442]

That would be more like a Dana 60

[homefrontsniper]

Precision made Axles!