View Full Version : switching from 223 to 308
I have never done this before. I am switching new model 11 from .223 to .308.
I think I need standard front baffle # 103322 and s/a short std bolt head #104876
What else, if anything?
Also, is there anything I need to know before I start? tips/suggestions/warnings?
Thanks.
Robinhood
01-15-2015, 05:55 PM
Magazine, follower and barrel.
That is all you need for the action but you will need a difference magazine setup.
jonbearman
01-15-2015, 06:32 PM
You will need a go gage to set your headspace.
Yeah, yeah, yeah. :)
I have all that, already. :) i'm talking about the action.
I guess I kinda left that open a bit, didn't I?
Thanks again.
homefrontsniper
01-15-2015, 07:38 PM
Go with 6.5 creedmoor!
I might do that, Home. I'm not necessarily going to .308. That was just a hypothetical confirming what I needed as far as parts go.
One last question, just to be sure:
If I go 6.5 creed, does that mean I need a 6.5 creed barrel, too? ;)
homefrontsniper
01-16-2015, 11:10 AM
27" MTU KRIEGER 1in 8"
If I go 6.5 creed, does that mean I need a 6.5 creed barrel, too?
Depends on how you define "need". :cool:
BoilerUP
01-16-2015, 12:59 PM
27" MTU KRIEGER 1in 8"
I'll never understand the fascination with Dana 44 rifle barrels...
Hotolds442
01-16-2015, 01:05 PM
That would be more like a Dana 60
homefrontsniper
01-16-2015, 05:11 PM
Precision made Axles!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.