Any good reason ?

[Hammer]

.


Any good reason not to have at least two -- preferably three -- single-station presses like the RCBS Rockchucker mounted side-by-side in your reloading room ?

Even if you have a good progressive.


.

[Eric in NC]

No good reason at all - have a dedicated de-prime press and two other single stages for things like seperate seating and crimping steps on thin-walled 44 WCF or 40-72 brass.

I have thought about setting up a dedicated 30-06 assembly line for M1 ammo (just don't like to run it on the Dillon for some reason) - may get around to it one day.

[laportecharlie]

I have two RCBS Rockchuckers, one RCBS JR and one Lee. Always seem to find something for each of them to do.
Charlie

[BrentWin]

The only good reason would be that you didn't have room for 4.

[Nor Cal Mikie]

Bad enough if you only have room for one! :(

[Uncle Jack]

No hay problemo! I have two; a Forester Co-Ax and a Rockchucker.....would have another but I too am limited by space.

uj

[EFBell]

I have 2 single stations and a progressive on my bench. Seems like a fairly usefull setup.

[Uncle Jack]

Oh, He11! I forgot the Dillon 550 out on the back porch. The setup is too big for my miniscule "Man Cave".

uj

[bythebook]

I have 2 progressives and 2 single stages, 2 shotshell presses on my bench. Then 2 other presses on the shelf that I switch from time to time. Works for me.

[Uncle Jack]

OMG.....I also forgot about the two MEC loaders (12 and 28) stored on the back porch.

Are you sure that shotshell loaders count?

uj