View Full Version : Brass hunting
jerrriley
01-09-2015, 03:41 AM
I'm probably late to the party with this problem, but I'm having trouble finding 7mm-08 brass. The cheaper Remington and Winchester is what I'm looking for right now. I found Nosler and lapua, but that's overkill for semiautomatic I'll use this brass in. Any suggestions for shops and sites I probably don't know about or didn't easily find? Looked at the big guys already.
earl39
01-09-2015, 02:09 PM
Find cheap 308 brass and neck it down.
darkker
01-09-2015, 04:23 PM
+1 to the above post
LHitchcox
01-10-2015, 11:33 AM
I buy LC once fired .308/7.62x51 and neck it down leaving a slight false shoulder to get a crush fit in the 7-08 chamber. There has never been a need to neck turn any of the brass.
Steelhead
01-10-2015, 12:48 PM
I'd go the necked down 308 route.
7-08 win and rem brass is hens teeth now and when you do find it it's stupidly priced.
jerrriley
01-10-2015, 05:24 PM
Thanks. Just wanted to make sure it really wasn't out there and I wasn't finding it. I need 308 brass too anyway.
jonbearman
01-15-2015, 01:23 AM
Check powder valley for prvi partisan brass as they had some not too long ago. It is easily as good as Remington brass.
GaCop
01-15-2015, 08:19 AM
+1 to the above post +2!
67tundra
01-18-2015, 09:26 AM
I have around 40 once fired 7-08 if your interested pm me.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.