macguru
01-08-2015, 12:24 AM
I just wanted to say something nice about the Savage 10PC, as I have previously been critical of some of my factory barrels compared with aftermarket ones.
I shot this group last weekend at 700m (770yards) in 1-2moa of variable crosswind from the right:
http://shooting.hexsystems.com.au/shooting/19260
The points are:
Its a stock standard factory 308 accustock model 1:10 twist, shot from an f class rest.
Redfield Revenge 6-18x scope on 15?moa rail
It only has a 20" barrel so velocity is a bit low but still ok. I have shot it out to 800m
155gr berger target vlds seated just into the lands, 44gr ADI 2206H, CCI BR2 primers
This waterline is as good as I have ever seen from my 6mm Dasher F open rifle
I have pulled it apart a few times and can say that the accustock works, i wont be changing it on this particular rifle
I shot this group last weekend at 700m (770yards) in 1-2moa of variable crosswind from the right:
http://shooting.hexsystems.com.au/shooting/19260
The points are:
Its a stock standard factory 308 accustock model 1:10 twist, shot from an f class rest.
Redfield Revenge 6-18x scope on 15?moa rail
It only has a 20" barrel so velocity is a bit low but still ok. I have shot it out to 800m
155gr berger target vlds seated just into the lands, 44gr ADI 2206H, CCI BR2 primers
This waterline is as good as I have ever seen from my 6mm Dasher F open rifle
I have pulled it apart a few times and can say that the accustock works, i wont be changing it on this particular rifle