Steel one-piece scope rail

[DrThunder88]

Does anyone make a steel, one-piece Weaver or Picatinny rail for the Axis? I'd prefer a 20MOA version, but even flat ones seem hard to find in steel. Midway is confusing the issue by putting "Axis" in several product titles that they should not or so I would think. 110 single-piece mounts are not compatible with Axises, right?

[CarolinaShooter]

EGW makes an aluminum 20 moa mount

[DrThunder88]

I know. I have three! For this project, though, I'm looking for steel.

[Robinhood]

Ken Farrell. Pricey

http://www.kenfarrell.com/index.php?route=product/product&path=20_28&product_id=320

[upSLIDEdown]

Farrell is about the only one I know of in steel. Quality is top notch. I just bought a custom 60moa base from them for my new ELR rig.

[CarolinaShooter]

Picky picky :p

[DrThunder88]

Good call on Farrel, thanks! They are priced like they're the only ones making them, but it's still not too out of line with EGW's steel rails for 10/110 rifles.

[Rosco]

Badger does as well and not any less exspensive.


http://www.midwayusa.com/product/439592/badger-ordnance-1-piece-maximized-picatinny-style-20-moa-elevated-scope-base-savage-10-through-16-round-rear-axis-short-action-matte-steel

[DrThunder88]

See, that's one of the ones I saw that confused me. There's no way a single piece mount for a 10 should fit onto an Axis without having to machine the rail or the receiver, right? Several of the mounts for the 110 also say they're for the Axis, but I don't believe that's true either.

[CarolinaShooter]

Unless they have more than 4 holes to accommodate the different spacing I don't see how a one piece mount could fit both axis and 110.

[Rosco]

I have to call Badger customer support later this week about another issue and will ask for some clarification and report back.