View Full Version : 120 grit aluminum oxide sand blasting medium
Where or what type of store/supplier do I go to locally for 120 grit aluminum oxide?
I've looked online, it seems to require ordering from specialty supply houses. I thought I should be able to get it locally. If not, who do you that use this stuff recommend?
DrThunder88
12-16-2014, 05:12 AM
The closest thing I know of in a local store is 80 grit aluminum oxide at Harbor Freight. Brownells sells some smaller quantities of media than I have seen elsewhere if you're looking to avoid high shipping costs. Their "coarse" is 120 grit.
Where or what type of store/supplier do I go to locally for 120 grit aluminum oxide?
I've looked online, it seems to require ordering from specialty supply houses. I thought I should be able to get it locally. If not, who do you that use this stuff recommend?
Have you tried Tractor Supply? These stores are everywhere. After having tried several types of media, I have settled on glass beads.
ron
Robinhood
12-16-2014, 08:30 PM
MSC industrial supply.
Kramer industries. 1-888-515-9443.
120 mesh is 120 grit.
MSC industrial supply.
Kramer industries. 1-888-515-9443.
120 mesh is 120 grit.
Yep, I think that is where I ended up getting it from. about $60 for a 50 lb bag.
Thanks, guys.
Have you tried Tractor Supply? These stores are everywhere. After having tried several types of media, I have settled on glass beads.
ron
I thought they'd have it but they don't.
GunKote says 120 alum oxide.
Not knowing enough about it all to risk anything else for this application.
jonbearman
12-19-2014, 04:29 PM
Any sandblasting supply company in the yellow pages listed under sandblasting-supplies.
Starfighter_F104X
01-03-2015, 08:10 AM
for what do you need sandblasting media ? It#s very abrasive.
For gunparts I always use glass bead blasting, nice matte touch and less abrasive. Strong enought to remove rust.
GunKote pretty much "requires" it before applying. I called the company and the techs would not budge on that. They said it is needed for proper adhesion. I have yet to try it, but I am also hoping it will create a textured, matte surface. I would also like to see what I can get, finish wise, with the glass bead blasting.
stomp442
01-03-2015, 10:53 AM
I just checked Tractor Supply website and they sell some. If your local store doesn't carry it they can probably get it with free shipping if shipped to the store.
http://www.tractorsupply.com/en/store/marco-aluminum-oxide-abrasive?cm_vc=IOPDP
Starfighter_F104X
01-03-2015, 06:48 PM
Here is a picture of my Swede. The system and the bolt are glass bead blasted with a pressure of 55-60 psi.
The system is hot blued
http://img5.fotos-hochladen.net/uploads/20150103234050xyh9argo02.jpg (http://www.fotos-hochladen.net)
Starfighter_F104X
01-04-2015, 08:13 AM
Thanks - I like matte touch.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.