View Full Version : Okay - What is the easiest way to remove the recoil lug from the stock ?
tammons
12-15-2014, 07:56 PM
Okay - What is the easiest way to remove the recoil lug from the stock ?
sixonetonoffun
12-15-2014, 08:04 PM
Vise grips and gentle persuasion.
tammons
12-15-2014, 09:20 PM
Thanks
BillPa
12-17-2014, 11:59 AM
Okay - What is the easiest way to remove the recoil lug from the stock ?
A "Ye Auld Action Ripper Outer".
http://i43.tinypic.com/2ajosi9.jpg
Bill
DrThunder88
12-17-2014, 04:39 PM
Well, if you've got an Axis with a recoil lug on the barrel, that would be good! I know some people have milled off the fronts of their Axises and installed 110 lugs, but I imagine most will have the stock-mounted lug.
Why are you removing the lug, if I may ask?
tammons
12-17-2014, 05:26 PM
Creating a Target rifle with a BSA stock.
I will eventually turn off the front of the action and use a milled recoil lug and rebed the recoil lug, but this is how it will be set up for now.
I am interested to see how it shoots.
Barrel is a McGowen 26" 223 7 twist bull barrel I already had.
Too much work in this stock and I dont have the adjustable dovetail butt pad. A boyds stock would be about 10X easier.
http://www.savageshooters.com/showthread.php?40400-BSA-CFT-Target-Stock
DrThunder88
12-18-2014, 03:47 AM
I hadn't seen that thread before. Very cool!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.