Stock Swap

[Herb3]

I have a 10 FP-SR in .223 that I want to change the stock on and covert to DBM. I picked up a nice used laminate stock from a 12 VLP-DBM and want to make sure of the parts I need to do this swap.



I will need longer action screws going from a synthetic stock to the laminate one correct?
I will need the dbm bottom metal: part number 106238 frame assy short matte (dbm)
Also I will need the dbm bottom plate: part number 106245 mag bottom short matte (dbm)


The way I understand it I can use my current .223 blind mag box and follower with the above parts and be good to go. I am missing anything else?

Thanks