PDA

View Full Version : Finally finished my 284 Winchester



shoalwater
11-06-2014, 09:17 PM
Well it has taken me nearly a year to get this project done, work, kids, and just plain ole life always seem to get in the way. The picture of the target was just a random load I through together for barrel break in of 120gr Nosler BT, I had laying around, and some H4350. It's four shots in one wallered out hole and I pulled one a little right. I can't wait to really start doing load development with the Nosler 150gr LRAB's, which is the bullet I plan to shoot most of the time out of this gun. Should be a lethal combo on deer size game out to a 1000 yds or so. Here are the specifics

Stainless Axis action sent to SSS for truing job and bolt fluting
Rifle Basix trigger
NSS recoil lug and barrel nut
McGowen 24" Pac-Nor #4 contour barrel
SSS Axis Pro Hunter stock finished in Tru-Oil by yours truly
Ken Farrell low profile base with his 30mm low rings
Vortex Viper HS-T 4-16X44 scope
Flatline Ops Scope level

http://i1289.photobucket.com/albums/b504/Shoalwater10/Mobile%20Uploads/EE53C0D4-F1FC-43F0-A214-FC55328B6E38_zps0ly32jny.jpg (http://s1289.photobucket.com/user/Shoalwater10/media/Mobile%20Uploads/EE53C0D4-F1FC-43F0-A214-FC55328B6E38_zps0ly32jny.jpg.html)

http://i1289.photobucket.com/albums/b504/Shoalwater10/Mobile%20Uploads/4C07425A-8287-4CB2-885A-FB4B70A42DCB_zpsnwftthik.jpg (http://s1289.photobucket.com/user/Shoalwater10/media/Mobile%20Uploads/4C07425A-8287-4CB2-885A-FB4B70A42DCB_zpsnwftthik.jpg.html)

snowgetter1
11-06-2014, 10:16 PM
Nice build!

drybean
11-06-2014, 10:33 PM
Outstanding

scooterf79
11-07-2014, 01:16 AM
Looks very good! Anxious to see your accuracy results!
Scooter