model 16 new barrel

[freelagw]

Hi, I have a model 16 chambered in 7mm wsm, I am wondering if it is possible to switch it over to a .308? Also where to find parts.Thanks

[olddav]

Barrel chambered in .308 whinchester (large or small shank), .308 bolt head (which firing pin?), .308 whinchester go gauge, .308 whinchester nogo gauge or tape, barrel vise or action wrench (your choice), barrel wrench (smooth or slotted). All can be purchased from Midway USA as well as many sponsors of this site. Others will give you a more detailed answer.

[Stockrex]

bolt face sizes for your ref:

Short actions with a bolt face .Dia of .384 +/-
17 Rem, 204 Ruger. 222 Rimingtion, and 223 Rem.

Short actions with a bolt face .Dia of .470 +/-
225 Winchester, 22/250 Remingtion, 6mm Norma BR, 243 Win, 250 Savage, 260 Rem,
6.5/284 Norma, 7/08 Rem, 284 win, 300 Savage, 308 Win, 338 Federal, 35 Rem, and
the 358 Winchester.

Short actions with a bolt face .Dia of .540+/-
223 WSSM, 243 WSSM, 25 WSSM, 7mm Rem saum, 7mm WSM, 300 Rem saum, 300
WSM, 325 WSM, and the 350 Rem Mag.

Long actions with a bolt face .DIA of .470 +/-
220 Swift, 6mm Rem, 240 Weatherby Mag, 257 Roberts, 25-06 Rem, 257 Weatherby ,
6.5x55 Swedish, 270 Win, 7x57 Mauser, 7x64 Brenneke, 280 Rem, 30/06 Springfield,
8mm Mauser, 338/06 A Square, and the 35 Whelen.

Long actions with a bolt face .Dia of .540 +/-
264 Win Mag, 270 weatherby Mag, 7mm Rem Mag, 7mm Weatherby Mag, 7 STW,
7mm Rem Ultra Mag, 300 H & H, 300 Win Mag, 300 Weatherby Mag, 300 RUM, 303 Brit,
8mm Rem Mag, 338 Win Mag, 340 Weatherby Mag, 338 RUM, 375 H & H, 375 Weatherby,
375 RUM, 416 Rem Mag, 458 Win Mag, and the 458 Lott.

Long actions with a bolt face .Dia of .585 +/-
30/378 Weatherby, 338 Lapua, 338/378 Weatherby, 378 Weatherby mag, 416 Rigby,
416 Weatherby Mag, 460 Weatherby Mag, and the 470 Nitro Express.