PDA

View Full Version : 6.5x47 Lapua, load suggestions



Dennis
04-17-2010, 01:44 PM
McGowen 28" 1/8" twist barrel on a Savage VLP single shot action!

I am using Lapua brass and CCI 450 primers.

6mmbr has some great articles, but I was just checking to see if some has a perfect load (????) or favorite!

http://i957.photobucket.com/albums/ae56/Dennis4437/DSC03797.jpg

Budweiser360
04-17-2010, 04:16 PM
Only your rifle knows the "perfect load"

Dennis
04-18-2010, 11:40 AM
LOL, very true! I think I found it yesterday, shot a five shot group @ .217, four of the five were probably around .165! Will post picture as soon as I find my camera!

Dennis
04-20-2010, 08:35 PM
I might be getting pretty close to one . . . . . 100yds, measured .217

http://i957.photobucket.com/albums/ae56/Dennis4437/65x47L393RL15120smks.jpg

wwbrown
04-21-2010, 09:25 AM
I shot about 1,700 130 g Berger VLDs last year with my 6.5L and they sat on top of 34.8 g Varget. The load was not a screaming load chony'ed at 2.750 but was extremely accurate, scored a lot if high 190's out of 200 in F-class and a couple of clean targets.

wade

Dennis
04-23-2010, 06:58 PM
I will definetly try this load out!