LongRange
10-25-2014, 05:28 PM
so after seeing allan1066s annealing machine(which is very nice) I thought id post up some pics of my GETTO annealing set up. I built this out of scrape metal I had laying around the garage,not that I cant afford a high dollar unit im just cheap and would rather spend a grand on barrels or reloading supplies or a new build ECT.
the getto set up
http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo4-4.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo4-4.jpg.html)
ready to anneal
http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo1-9.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo1-9.jpg.html)
I know the flame needs to be on the brass this is just for show
http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo1-10.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo1-10.jpg.html)
thumb screw to adjust drill speed and wing nuts to clamp drill into place
http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo3-6.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo3-6.jpg.html)
home made thumb screw(because I was to lazy to go buy another one)to adjust the bottle height for different cases
http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo2-10.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo2-10.jpg.html)
I anneal every 3 firings..i put a drop of tempilaq 750 on the inside of the necks on 5 cases..i run 2 and count..then run 40-50 cases and run 1 or 2 more with the tempilaq and count then run the rest...I anneal 200 cases at a time..100 300 win mag and 100 260rem...200 cases takes me about 20mins start to finish.
the getto set up
http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo4-4.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo4-4.jpg.html)
ready to anneal
http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo1-9.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo1-9.jpg.html)
I know the flame needs to be on the brass this is just for show
http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo1-10.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo1-10.jpg.html)
thumb screw to adjust drill speed and wing nuts to clamp drill into place
http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo3-6.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo3-6.jpg.html)
home made thumb screw(because I was to lazy to go buy another one)to adjust the bottle height for different cases
http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo2-10.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo2-10.jpg.html)
I anneal every 3 firings..i put a drop of tempilaq 750 on the inside of the necks on 5 cases..i run 2 and count..then run 40-50 cases and run 1 or 2 more with the tempilaq and count then run the rest...I anneal 200 cases at a time..100 300 win mag and 100 260rem...200 cases takes me about 20mins start to finish.