Need a Savage trigger sear. Where to buy?

[KTP]

I need a trigger sear part # 105268. They are $9.00 on the Savage web site but you have to be a gunsmith to buy one.
Where can I pick one of these up?

[geargrinder]

Brownells, sells the top release sear. But it is out of stock.

http://www.brownells.com/rifle-parts/triggers-parts/sear-parts/sears/sear-prod13056.aspx?avs|Manufacturer_1=SAVAGE

Keep an eye on gunbroker and ebay.

[dubnali]

What about Numrich?

This is the first model 10 schematic I pulled up:
http://www.gunpartscorp.com/Manufacturers/SavageStevensSpringfieldFox-33479/Rifles-40502/10Series-39671/10CYXP-33618.htm

[KTP]

Thanks guys, I'll look around on Numrich. This is the Accutrigger sear.

[short round]

Accutrigger & Nonaccu are same.

[KTP]

Thanks all. Have one on order!!

[Newtosavage]

Hate to dredge up an old thread, but I'm still looking for a 110 newer trigger sear.

Any help where to find one would be appreciated.

[Fotheringill]

BTW-

They won't sell a $2.00 spring for a trigger to a non-gunsmith either.

[Texas10]

You'll have to employ the services of a gunsmith. Take your serial number to him and ask that he order a sear for your serial number firearm. They're not terribly expensive, your local gunsmith may or may not markup the price. Expect it will take several weeks.

Are you wanting a top bolt release sear for a accutrigger? You can probably get the sear or the whole trigger off someone here for less trouble.

[Newtosavage]

You'll have to employ the services of a gunsmith. Take your serial number to him and ask that he order a sear for your serial number firearm. They're not terribly expensive, your local gunsmith may or may not markup the price. Expect it will take several weeks.

Are you wanting a top bolt release sear for a accutrigger? You can probably get the sear or the whole trigger off someone here for less trouble.

Except that I'm not ordering a sear for a gun I have. I'm ordering a sear to change out my trigger group. I'm converting an early Chicopee Falls gun to the newer style top bolt release sear so I can install an aftermarket trigger. I'll try here first. Thanks.