Agghhh !!!

[shovelheadave]

So I'm going to build a new PD rifle.

Shilen Select SS Match arrived last week.

Really wanted a LH BVSS for this so, I called Numerich's and talked to the tech.......

Me - "are part number xxx and xxx 4.27" action screw spacing or, a 4.40" action screw spacing??"

Tech - "Let me go measure it........it's 4.40" for sure"

I sell my 4.27" action and order a new center feed LH 16 donor...... should be at the FFL tomorrow.

The stock arrives today....you guessed it....it's a 4.27".

Now I have three 4.27" stocks and no 4.40" stocks.

Ok, I'm done complaining now.

EDIT: Called Numerich today.....they were ETREEMELY helpful. Turns out the difference between the two part numbers is more than just the sling swivels. One is a 4.27” the other is a 4.40”. They’re going to get me all squared away.
Thumbs up to Numerich for making things right.

[sixonetonoffun]

I had same experience Numrich. I just assume they are 4.27 if the descriptions don't specifically say 4.40

[shovelheadave]

Called them about it. They found the problem and are doing a good job of making it right.

[shovelheadave]

...all except for charging me shipping on the wrong part, then charging return shipping on the wrong part and shipping again on the new one.........that I haven't received now three weeks later.

Scratching Numrich off of the "places to order from again" list.

[jonbearman]

Did you ask for a refund on the shipping,if you haven't talk to a supervisor. I think they will do roght by you, I wouldn't cast them aside. It happened to me with stockys and in the end it was my fault.

[Stockrex]

if ya bought it with a credit card have them fix it for you.

[shovelheadave]

I used a CC.

This was all because the Tech gave me bad info.

I'll give them a call.

Thanks guys.