H1000 in a remington 260

[LongRange]

The only real problem with compressed loads is your bullet can walk out after time changing ogive to rifling change. I always reseat before going shooting if it is a compressed load and it only takes a few minutes of time.

Thanks for the heads up...I always load the night before and rarely keep loaded riffle ammo around but if I do ill be sure to reseat them prior to shooting.

[LongRange]

http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo-4.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo-4.jpg.html)

Well yesterday I played with seating depth and went the wrong way seating at .002 and .004 off the lands and everything opened up so this morning I went .006 and .008 and used CCI200 and FED210 primers the, feds are a little hotter and shot great at .006 off the lands. Im liking this load a lot...this was shot off a bipod and my hand in the rear like at a match...off bags im thinking it would be 1 hole.

[LongRange]

http://i1239.photobucket.com/albums/ff515/LTT-/Mobile%20Uploads/photo1-4.jpg (http://s1239.photobucket.com/user/LTT-/media/Mobile%20Uploads/photo1-4.jpg.html)

Wind came up and was about 6-8mph from about 430 on this group...I hit the trigger closing the bolt on the third round thats the low right shot.

[rjtfroggy]

I shot the 260 yesterday previously stated load. Shot a 0.48 five shot group and a 0.87 ten shot. If I was hunting this year this or my 250/3000 18" barrel would be what I would use.

http://i1004.photobucket.com/albums/af166/rjtfroggy/DSC00502.jpg (http://s1004.photobucket.com/user/rjtfroggy/media/DSC00502.jpg.html)