Stevens 200 ejection problem

[Wooky]

Hi to all,
I have a Stevens 200 that won't eject "PINK" snap caps and some times the caps stay in the chamber.
I recently pulled the bolt apart for some polishing on some areas to make for a smoother bolt lift and cycle.Oiled everything nice ang good with G96 and it did improve, but will not eject properly.

Wondering if any one has some advice.
Thanks

[drybean]

Bet it is your snap caps

[bootsmcguire]

Bet it is your snap caps

+1.

[jonbearman]

You cant judge proper operation with plastic snap caps. The azoom aluminum work good in functions tests I have performed. If the problem persists let us know once you cycle new ammo through your new rifle.

[BillPa]

Snap caps are just that, snap caps, something for the firing pin to bottom out on when dry firing, They're not intended to be used to check the function of a firearm. If you want to check it's function, feeding, extracting-ejecting and etc use dummy rounds or empty brass.

Bill

[gotcha]

+1 or make up a dummy round using a spent primer.