PDA

View Full Version : Rimfire Savage Striker no shim trigger job



oneissuevoter
09-07-2014, 12:29 PM
I was about to perform the " Shim" fix on my rimfire savage striker. I took the trigger group out. I stoned the sear face and lever contact surfaces, then I started looking at the engagement spring.

I had a AR15 LPG kit in my smithing tackle box, and realized the bolt catch spring was the same diamiter but shorter.

I put it in. Took the travel take up screw all the way down to the keeper bolt, and reassembled.

Perfect 3.2 lb trigger with no shim.

Try it.

JCalhoun
09-09-2014, 05:22 PM
Cool!

oneissuevoter
09-09-2014, 05:26 PM
Ill post pics of the 100m five shot groups this weekend.

oneissuevoter
09-13-2014, 07:35 PM
Success!!!

http://i1201.photobucket.com/albums/bb358/oneissuevoter/temporary-7.jpg (http://s1201.photobucket.com/user/oneissuevoter/media/temporary-7.jpg.html)

http://i1201.photobucket.com/albums/bb358/oneissuevoter/DFEDE24A-E7F4-436E-8D90-134689924852.jpg (http://s1201.photobucket.com/user/oneissuevoter/media/DFEDE24A-E7F4-436E-8D90-134689924852.jpg.html)

http://i1201.photobucket.com/albums/bb358/oneissuevoter/AB1EA511-259A-441F-BBC9-6D8D682AA267.jpg (http://s1201.photobucket.com/user/oneissuevoter/media/AB1EA511-259A-441F-BBC9-6D8D682AA267.jpg.html)

http://i1201.photobucket.com/albums/bb358/oneissuevoter/B4FFFEE3-9ECE-4853-9A1A-37CF4B0FDD29.jpg (http://s1201.photobucket.com/user/oneissuevoter/media/B4FFFEE3-9ECE-4853-9A1A-37CF4B0FDD29.jpg.html)

Last two fast

http://i1201.photobucket.com/albums/bb358/oneissuevoter/34067A0F-17D4-4D6E-880E-A20133669C21.jpg (http://s1201.photobucket.com/user/oneissuevoter/media/34067A0F-17D4-4D6E-880E-A20133669C21.jpg.html)

oneissuevoter
09-13-2014, 07:36 PM
All fired at 100m. 5mph wind R-L. 40 Gr Winchester super x .22 WMR. 7.5 inch barrel. 10x magnification on the scope.

Triangles are 1 inch.

oneissuevoter
09-13-2014, 11:09 PM
What it was before the trigger job- fliers were hard to avoid:

2 inch hivis-

http://i1201.photobucket.com/albums/bb358/oneissuevoter/temporary-18.jpg (http://s1201.photobucket.com/user/oneissuevoter/media/temporary-18.jpg.html)

JCalhoun
09-14-2014, 08:39 AM
Very nice!