cracked Boyd's stock

[coldmaker]

went to try my rifle sunday with my new boyd's stock.
i was disapointed in the accuracy. this rifle ( savage 16) easily groups moa with the original plastic stock and this load
i was getting fliers that brought the groups to 2.5 to 3''

when i got back home i removed the stock and noticed the stock was cracked here

http://i1370.photobucket.com/albums/ag248/300remum/IMG_2056_zpsc8ac02b9.jpg (http://s1370.photobucket.com/user/300remum/media/IMG_2056_zpsc8ac02b9.jpg.html)

http://i1370.photobucket.com/albums/ag248/300remum/IMG_2055_zps2f45067f.jpg (http://s1370.photobucket.com/user/300remum/media/IMG_2055_zps2f45067f.jpg.html)

i am wondering if this is what cause my accuracy problem?
and if pillar bedding would repair the stock?

looks like i tightened the action screw to much. i'm used to rifles with pillar, when tightening this it always felt mushy

[wbm]

i am wondering if this is what cause my accuracy problem?

A crack like that would definitely cause accuracy problems.

[stomp442]

Way to much torque on the screws there pal. Pillars may help but that's a bad spot for a crack.

[reynoldsfamily3]

Cracks like that seem to be happening a lot lately.

[olddav]

I'd get me some Acraglass (original), glue the stock. Then I would install pillars using Acraglass (original), shouldnt have any more problems.
That's enough unsolicited advice for now.

[foxx]

Mine did the exact same thing... Dremelled out a lot more of the wood deep and all around and then inserted cut-down drywall screws cross-wise and some heavy duty staples from a cardboard box into the Acraglass. Has not been a problem since. Others here have reported the same problem. I'm not gonna gripe. It's an inexpensive stock and an easy fix.

Oh, BTW, my "fix" does require pillars, but I always do that, anyhow.

Also, as olddav said, go with Acraglass. I usually bed with Devcon 10110, but that kept cracking. It didn't hold 'till I used Acraglass on the stock and then topped it (finished the bedding) with Devcon 10110.

[pwdnt]

looks like a split on the glue line same thing happened to mine. I would contact boyds