View Full Version : Recoil Pad for Savage 10 Trophy Hunter XP (wood stock)
pmcclarty
08-20-2014, 04:05 PM
Recently bought limbsaver model number 10601 (recommended for savage 10...4.75 x 1.685). It is perfect width, however it is a little short (by like .17 in). The other model recommended for savage is 10111(4.92 x 1.605), which is perfect length but is not wide enough. Any suggestions?
PM
Bharada
08-20-2014, 05:52 PM
I bought a medium Pachmayr Decelerator (http://www.amazon.com/gp/product/B000WSUZ50/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) for mine. It fits perfectly.
stomp442
08-20-2014, 08:07 PM
Grind to fit is the only way to go. Usually the mediums work best.
CAPTBEACH
08-20-2014, 11:05 PM
Grind to fit medium...tip...freeze the pad solid in the freezer or in a bag of crushed dry ice...it will make grinding and sanding smooth easy button easy...
stomp442
08-21-2014, 11:52 AM
Another trick is to use balistol aerosol spray on the sanding wheel and on the pad. Makes for a very smooth finish I prefer this method over the freezing.
CAPTBEACH
08-21-2014, 12:52 PM
Another trick is to use balistol aerosol spray on the sanding wheel and on the pad. Makes for a very smooth finish I prefer this method over the freezing.
WD40 works too...
pmcclarty
08-21-2014, 03:05 PM
Thanks everyone for ideas.....will try it...PM
pmcclarty
08-21-2014, 03:06 PM
did you take off factory pad or just placed it over the factory pad?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.