PDA

View Full Version : A Varmints Worst Nightmare



Pages : 1 [2]

sparky123321
08-19-2014, 10:36 AM
Sure hope that's a large shank barrel and 0.500" bolt lugs. Actually, I'd prefer custom 0.550" lugs.

scope eye
08-19-2014, 11:41 AM
Sure hope that's a large shank barrel and 0.500" bolt lugs. Actually, I'd prefer custom 0.550" lugs.

As a matter of fact it is a small shank, all my RUM are small shanks, the major reason is "bolt thrust" they difference in they amount, and the duration of bolt thrust, are astronomical between the two, when launching a 110gr Vmax and launching a 208gr Amax, and that is what allows me to run a small shank.

Dean

FW Conch
08-19-2014, 11:58 AM
Hey Dean. How clear is the Swift scope from 25 to 32 power? And how easy is it to acquire site picture and stay on it?

Thanks....Jim :-))

scope eye
08-19-2014, 01:10 PM
Hey Dean. How clear is the Swift scope from 25 to 32 power? And how easy is it to acquire site picture and stay on it?

Thanks....Jim :-))

Hey Jim, they are clear all the way to 32X, and the field of view is half decent, but by far there best feature is they stand up to my RUM, the are by far the best value going, as far as I am concerned anyways.


Dean

FW Conch
08-19-2014, 01:56 PM
Sounds like a great value! Thanks scope! :-))

sparky123321
08-19-2014, 02:44 PM
You're a braver man than I. It would be a large shank and 0.500" lugs for me. Then again, I'm just too darn good looking to take the chance of having a bolt come back in my face or a barrel turn into a grenade. :-)

bootsmcguire
08-19-2014, 07:00 PM
Great now no matter how stiff the bolt lift is, or how flat the primer is, I am going to keep adding powder until I reach 4700FPS, just to make sure boots did not waste his time, the pressures on, did you catch that, the pun, you know the play on words, pressure get it, never mind.

Dean

Aren't you glad I didn't say 5000fps? ;)

I have a feeling you will make it to 4700 with little effort.

scooterf79
08-19-2014, 07:11 PM
So....Dean, when are we gonna hear/see some results? So thats how it works? Somebody puts in some numbers for ya and you just work up till you get it. Nice! I like it lol. Boots, are you sure you didnt put 5000 in that calculation? ;)
Scooter

scope eye
08-19-2014, 07:19 PM
I am going to record this stunt on my phone, and post it so it will be bonafied, I am going up to New Hampshire labor day weekend, can't wait, all the while hoping for good groupings.

Dean

bootsmcguire
08-19-2014, 07:33 PM
Sighted at 100yds, scope 1.5" over bore, shooting the 110 V-Max, at 5000fps (the highest this calculator will allow):
0yd = -1.5" with 6,108 ft/lb of muzzle energy
100yd = 0.0
200yd = -0.15"
300yd = -2.27"
400yd = -6.81"
500yd = -14.36" still with 2,250 ft/lbs of energy

Does that get your mouth watering Dean? If it doesn't just think of all the bacon you could eat each morning on the camp fire before heading out to the pdog fields when you head west someday.

scope eye
08-19-2014, 07:47 PM
Hey Boots, Is that inch's or MOA, if it is inch's that's 2.75 MOA at 500 yards, WOW

Dean

bootsmcguire
08-19-2014, 09:22 PM
it is "Inch"

Mortarman0341
08-20-2014, 10:28 AM
Tag, need to know.

Redandwhite_72
08-22-2014, 01:20 PM
Tag for the results.