Another DBM Question

[Old Guy]

I bought a Model 11 Trophy Hunter XP in .308. I'm going to switch it over to a Boyds stock. I know I need the bottom plate for the change over. But when I went on Savage's Parts Finder and entered the serial number for my rifle, I could see the bottom plate in the schematic, but it's not selectable.

So, when I call Savage to try to order the part, can I order the part by my model or do I ask for the bottom metal for a Model 10 or... :confused:

I guess the same question would apply for the metal plate for the bottom of the magazine?

Thanks for any help.

[Hotolds442]

These should be the parts you need.

MAG BOTTOM, SHORT (308)MATTE (DBM) - PN: 106245 $19.00
FRAME ASSY SHORT MATTE (DBM) - PN: 106238 $68.00

I used G901441 as a serial number to find your parts.
youll also need to order new screws from Boyd's when you order your stock, read their fine print.

[Old Guy]

Thanks!

[Texas Solo]

When I went from a blind mag in my #12BVSS to a DBM in a Choate stock, I too needed a bottom metal and mag.
I just called Savage and told them what I wanted to do. The C.S. rep looked it up for me and sent the parts.
They were the correct parts...unlike the part numbers I had looked up using a bogus serial number.

[Old Guy]

I had thought about just calling them and telling them what I was doing. But even though I've heard their C.S. is really good, with my luck, I'd get the new guy telling me there's no such part for my rifle...