PDA

View Full Version : Centerfire my hornet


olskool
07-20-2014, 06:01 PM
http://i1220.photobucket.com/albums/dd445/olskool1/102_0028_zps39e82e87.jpg (http://s1220.photobucket.com/user/olskool1/media/102_0028_zps39e82e87.jpg.html)http://i1220.photobucket.com/albums/dd445/olskool1/102_0029_zps4291b8f6.jpg (http://s1220.photobucket.com/user/olskool1/media/102_0029_zps4291b8f6.jpg.html)http://i1220.photobucket.com/albums/dd445/olskool1/102_0031_zps0dce1087.jpg (http://s1220.photobucket.com/user/olskool1/media/102_0031_zps0dce1087.jpg.html)
olskool
07-20-2014, 06:07 PM
here is my new to me 22 hornet. this is the 3rd savage hornet, i will keep this one. it has a vintage usa made 2x7 redfield and i think a savage made mount. this gun shoots one hole groups with factory ppu 45gr sp. my handloads are a close second with a speer 45gr sp and lil,gun with wolf small pistol primers. i had a 340 about 20 years ago with pressed checkering that had what looked to be a piece of extra fancy walnut. it was beautiful i wished i would have kept that one.
The Old Coach
07-23-2014, 01:50 AM
Nice looking finish on the wood. My .222 looks that nice, but it took hours and hours of oiling after stripping the factory finish.

I have the idea that all those mounts were made by Weaver. One of mine (NOS from evilBay) as I remember came in Weaver packaging,

Agree 100% with your load.
bootsmcguire
07-23-2014, 08:52 PM
Very nice.
Redflag
07-24-2014, 12:17 AM
Hi Guys Newby here,
Just purchased a 340 22 hornet as a project.
It is missing the barrel band and the scope mounts looks like a cheapy.
My question is should I just get a new band from numrich or has anyone tried brazing another mount on the rear of the trigger group.
I have seen a guy on the web do this to bed and float the rifle.
I guess it should shoot ok with the barrel band.
Any web links much appreciated.
cheers
Redflag
olskool
07-24-2014, 10:02 AM
mine shoots good with the band, i would put it on it's there for a reason.
Redflag
07-24-2014, 07:32 PM
thx
savagetoter
07-26-2014, 11:16 PM
Olskool, very nice. Interesting mount on that rifle...never seen one quite like it before, at least on a non-military rifle anyways. Very nice.
KS95B40
08-14-2014, 08:59 PM
Olskool, very nice. Interesting mount on that rifle...never seen one quite like it before, at least on a non-military rifle anyways. Very nice.

That is the factory stamped steel integral mount and rings for the model 340. I have that same mount on my .223 model 340E with a steel tube Weaver K4. Not real attractive but quite serviceable.
By the way OP, that is a nice looking Hornet.