View Full Version : 338lm head srperation
pittbull46
07-10-2014, 06:32 PM
Hello I was shooting my 110bs 338lm and had a head seperation does anybody know where to buy a stuck case removable tool?
Dennis
07-10-2014, 07:01 PM
Case head separation?
pittbull46
07-10-2014, 08:35 PM
sorry yes Case head separation the case is stuck in the chamber
243LPR
07-10-2014, 10:23 PM
Screwdriver pr tight fitting patch.
seanhagerty
07-10-2014, 10:34 PM
Try a chamber brush, push it in and twist it in, then pull it out. Case should come with it.
Dennis
07-11-2014, 02:09 AM
2 things that I know of, 1-a well used case, # 2-excessive headspace which has happened to me. Try the above 2 suggestions above and we will go from there.
Flyin Brian
07-14-2014, 11:28 AM
If you can get a stuck case remover for 8mm, I bet there is enough spread to grip the inside of a 338 case. The trick is to use a cleaning rod to drive it out from the muzzle, instead of trying to use the bolt/extractor like it says in the instructions.
I just had a badly stuck surplus case in my SVT 40 and got it out this way, after everything else failed.
Good luck!
yobuck
07-14-2014, 11:37 AM
A bronze brush pushed thru then retreived usually works. Next size larger might be necessary, go clear thru the barrel before pulling it back.
pittbull46
07-14-2014, 04:08 PM
thanks for the help I took it to a gunsmith to remove and polish the chamber I read somewhere that it helps with stuck hornady cases
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.