dakotamike
06-27-2014, 12:36 AM
I have enjoyed other people's pictures, so I thought I would post some of my own for a change.
I have been putting together parts for a while for my newest addition to the family. I started out with a Model 11 Hunter, nonaccutrigger. My goal is for a long-range coyote sniper. In the winter, I often spot coyotes laying on the hillsides or by cover sunning themselves. Hopefully I can pick them off from a distance before they are startled and run.
http://i1280.photobucket.com/albums/a486/redsteiger/mike1037_zpsabf406ff.jpg (http://s1280.photobucket.com/user/redsteiger/media/mike1037_zpsabf406ff.jpg.html)
http://i1280.photobucket.com/albums/a486/redsteiger/IMG_0046_zps1a3a8487.jpg (http://s1280.photobucket.com/user/redsteiger/media/IMG_0046_zps1a3a8487.jpg.html)
http://i1280.photobucket.com/albums/a486/redsteiger/IMG_0044_zps0b53e283.jpg (http://s1280.photobucket.com/user/redsteiger/media/IMG_0044_zps0b53e283.jpg.html)
Model 11 Action CF DBM
CBI 243 Improved 1:8 twist Light Varmint--slightly used
Rifle Basix Model 1 trigger
Model 12 VLP stock, bedded--used
I do have a Vortex 6-24x50 PST to mount on it, but it went back to Vortex for warranty work a week ago. This was my first attempt at bead blasting stainless. I am pretty happy with the results. I will try to remember to post some pics once everything is together. Still a few more mods to complete.
Karstan Cheek Rest
Duracoat
Scope, Reticle Level, Caps
Better scope base--not impressed with the Weaver, too much slop
I already have 100 rounds of Lapua brass that were fireformed to the barrel (came with the barrel). Picked up some 105gr. Hornady Match BTHP. I plan on trying some IMR 4831, Retumbo, and H1000. I will post pics and loads as I get things done.
I have been putting together parts for a while for my newest addition to the family. I started out with a Model 11 Hunter, nonaccutrigger. My goal is for a long-range coyote sniper. In the winter, I often spot coyotes laying on the hillsides or by cover sunning themselves. Hopefully I can pick them off from a distance before they are startled and run.
http://i1280.photobucket.com/albums/a486/redsteiger/mike1037_zpsabf406ff.jpg (http://s1280.photobucket.com/user/redsteiger/media/mike1037_zpsabf406ff.jpg.html)
http://i1280.photobucket.com/albums/a486/redsteiger/IMG_0046_zps1a3a8487.jpg (http://s1280.photobucket.com/user/redsteiger/media/IMG_0046_zps1a3a8487.jpg.html)
http://i1280.photobucket.com/albums/a486/redsteiger/IMG_0044_zps0b53e283.jpg (http://s1280.photobucket.com/user/redsteiger/media/IMG_0044_zps0b53e283.jpg.html)
Model 11 Action CF DBM
CBI 243 Improved 1:8 twist Light Varmint--slightly used
Rifle Basix Model 1 trigger
Model 12 VLP stock, bedded--used
I do have a Vortex 6-24x50 PST to mount on it, but it went back to Vortex for warranty work a week ago. This was my first attempt at bead blasting stainless. I am pretty happy with the results. I will try to remember to post some pics once everything is together. Still a few more mods to complete.
Karstan Cheek Rest
Duracoat
Scope, Reticle Level, Caps
Better scope base--not impressed with the Weaver, too much slop
I already have 100 rounds of Lapua brass that were fireformed to the barrel (came with the barrel). Picked up some 105gr. Hornady Match BTHP. I plan on trying some IMR 4831, Retumbo, and H1000. I will post pics and loads as I get things done.