View Full Version : Long action Magnum Action. Which one?
rigelb79
03-28-2010, 10:10 PM
I am new to this and am wanting to build a 7mm STW using a factory small shank 7mm rem mag barrel that I have reamed out. I currently have a standard magnum pre accutrigger action but the opening for the mag box is only 3.5" long. What action would I need to get to use cartridges longer than 3.5" and that would take small shank barrels?
Smokey262
03-28-2010, 11:54 PM
http://savageshooters.com/SavageForum/index.php/topic,11526.0.html
rigelb79
03-29-2010, 10:07 AM
Ok that tells me that they make a mag box long enough but the ultra mag box will not fit on the action I have right now as the opening just is not long enough. So what action has a long enough cartridge opening that will take the longer mag box.
Carvera
03-29-2010, 11:09 AM
The STW, and H&H factory rifles would be a good start.
HRstretch
03-29-2010, 01:57 PM
There are some old 300 RUM and I have an 7 STW action I was lucky to find that will work, but there like hens teeth to locate. Any 375 H&H action will work. Find any of these in a Savage and go to town.
rigelb79
03-29-2010, 03:01 PM
Well sounds like it is just a matter of keeping my eyes open. Thanks for the info.
learjet
03-29-2010, 03:55 PM
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=161988283
looks like a small shank. decent price, 2hrs 30 mins to go
GUNFANATIC
03-29-2010, 05:01 PM
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=161988283
looks like a small shank. decent price, 2hrs 30 mins to go
That's just too pretty to use for a donor. :-\
rigelb79
03-29-2010, 08:56 PM
I missed it the first time but am watching for a relist. If I get it I promise not to bugger it as it is a beautiful piece!
dnuke146
04-01-2010, 11:47 AM
That's just too pretty to use for a donor. :-\
[/quote]
Really??, the thing just screams .338 EDGE to me ;D
Or you could just open up the action you have to take the longer magazine box, then it would simply involve finding the correct box, follower and baffle.
Bob
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.