Who makes a lugged 20 MOA base for me?

[Tarheelpwr]

I'm looking to find a LA, flat back base with 20 MOA (or some preferred, flat will work though) that has an integral recoil lug. Does anyone make this? As close as I can find is a 20 MOA base with 8-40 screws, but then I have to pay to have the receiver altered.

This brings my next question. Is a 7MM RUM enough recoil to be considering these things, or will a standard base with #6 screws be fine?

[emtrescue6]

A quality standard base (like an EGW) properly installed should be fine on a 7mm Rum....

[DrThunder88]

As I understand it, the Weaver Tactical one-piece (#99494) has a lug. The Farrel FG-Force series also seems to have a device to clamp the mount to the receiver.

[Tarheelpwr]

I'll have to dig deeper into the Farrell. The website shows them not being full pic rails on the flat back style.

That 99494 Weaver is for a round back.

[Rick_W]

I have a standard one-piece base (EGW I believe) on mine and have not had any problems.

[Tarheelpwr]

I have a standard one-piece base (EGW I believe) on mine and have not had any problems.

Thanks. That seems to be the consensus. I'll go with standard and save a few bucks.