Need Help-NewPredator Hunter 6.5 Creedmoor owner

[Jhawley899]

Need advice on scope rings. I want to be as low as possible to bore axis. I am going to put 10 power SFWA 42mm scope. Should I go with low or medium rings and which ones. Don't want to spend over $100 on rings. I'm assuming base mounts installed at factory are decent enough.Thanks.

[limige]

Im using low warne rings myself. They seem like a decent ring for a reasonable price.

Ill try to snap a pic of clearance later. I use a vortex 44mm

[limige]

Btw if you want to go luepold they are closer yet... I am pulling the luepold from my model 16 and installing an egw rail and warne rings.
I just dont like the design of them. Fit and finish are excellent. Mine are 30 mm for the vortex

[limige]

Heres the luepold lows on a 44mm with a sporter barrel

http://i41.photobucket.com/albums/e256/limige/20140424_065630_zps490d9c76.jpg

And here's the warne lows on a 20 moa rail and warne lows on a 50 mm and a bull barrel

http://i41.photobucket.com/albums/e256/limige/20140424_065452_zps3d2fc353.jpg