Any Hog Hunter Pictures ?

[40bullzi]

Campdude, which short action did you order? 110, 111, and will factory box mag work?

any mods to get the recoil lug to fit? Thanks.

[wingspar]

It's a 2997 - I just picked one up in a different color for my Hog Hunter. Sadly it's going back since the wrist angle doesn't work with my arthritis, but it's a top quality stock.

Just ordered one. Hope the wrist angle works. I’ve never used a stock like the B&C Medalist before.

[GV889]

Txhillbilly, which Boyds stock did u use? I just one for my Axis II and love it. Boyds said they do not make one for the hog hunter. I assume you did some fitting work to it? Thx.
I have two Hog Hunters and would like to put a Boyds Laminated stock on one but was told they don't make one for the M11 Hog Hunter, If a lot of hog Hunter owners request Boyds make one maybe they will consider it!

[campdude]

Campdude, which short action did you order? 110, 111, and will factory box mag work?

any mods to get the recoil lug to fit? Thanks.

I ordered this one because I wanted to convert to DBM. I also had to open up the barrel channel to accommodate the contoured barrel and make some room for the DBM metal. Very little work on the recoil lug.

PRAIRIE HUNTER SAVAGE 11 TOP BOLT RELEASE DBM SHORT ACTION FACTORY BARREL CHANNEL PEPPER LAMINATE FINISHED (43A184D-18-112)

[sbarkowski]

When I wanted to do a build up the hog hunter was an obvious choice. It already had most of the features I wanted from a factory rifle. The rifle itself though was **** hard to find in my area. I'm very pleased with it.

https://scontent-lga.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10999431_10152714574488301_5044650622224450893_n.j pg?oh=7465e05f78ab06dfbd4c6b8082142402&oe=554A571C

[Rooster 50]

I seem to remember last year they were asking for the use of a hog hunter to use to make a stock. I offered mine and never heard another word from them.

[40bullzi]

Thank you, Sir!

[40bullzi]

Sbarkowski.....That is sick! Love it! Manufacturer of the stock? How does she shoot?

[40bullzi]

I seem to remember last year they were asking for the use of a hog hunter to use to make a stock. I offered mine and never heard another word from them.

Rooster 50: I did that same thing this Past January (2015). No response either.

[sbarkowski]

It's an MDT LSS chassis. Hogue grip, Fab Defence GL Shock stock and a milspec buffer tube. Havnt had a chance to even sight it in yet. Too busy and **** cold! I shot it twice in its factory form just to check the function then tore it apart. Its been a winter project.

[campdude]

.308 with Leupold 2-7.

http://i916.photobucket.com/albums/ad1/TORCHRIDER/HH-1_zpslktqi45g.jpg (http://s916.photobucket.com/user/TORCHRIDER/media/HH-1_zpslktqi45g.jpg.html)

http://i916.photobucket.com/albums/ad1/TORCHRIDER/HH-2_zpsau9hemil.jpg (http://s916.photobucket.com/user/TORCHRIDER/media/HH-2_zpsau9hemil.jpg.html)

Nice, I would loose it

[robtattoo]

Here's mine....http://i4.photobucket.com/albums/y110/robtattoo/Mobile%20Uploads/20150325_135800_zps2pkyywlu.jpg (http://s4.photobucket.com/user/robtattoo/media/Mobile%20Uploads/20150325_135800_zps2pkyywlu.jpg.html)
http://i4.photobucket.com/albums/y110/robtattoo/Mobile%20Uploads/20150325_135746_zpsgcp0ywtr.jpg (http://s4.photobucket.com/user/robtattoo/media/Mobile%20Uploads/20150325_135746_zpsgcp0ywtr.jpg.html)

Standard action & barrel, take-off Savage non-accustock (no idea which model!) EGW rail, Redfield Revenge 2-7x32 in the cheapest QD rings I could find, Accurate Mag DBM & $20 eBay break.

And this is what it'll do at 500yds...http://i4.photobucket.com/albums/y110/robtattoo/Mobile%20Uploads/20150325_135334_zpskgcpqbbx.jpg (http://s4.photobucket.com/user/robtattoo/media/Mobile%20Uploads/20150325_135334_zpskgcpqbbx.jpg.html)

[wingspar]

When I posted on page 4 of this thread with my new Hog Hunter, a muzzle brake and a scope were all that I was going to do. An aftermarket stock was not even on my wish list. Oddly enough, a Bell & Carlson Medalist/Varmint stock was the first thing I did, then I put a scope on. Still no muzzle brake and I have about 160 rounds thru it and I just love shooting this gun. The stock makes a big difference. The gun started out stock at 7 ½ pounds, it now weighs 12 pounds. Takes up a tad bit of the recoil.

http://www.pbase.com/wingspar/image/159470803/original.jpg

[campdude]

When I posted on page 4 of this thread with my new Hog Hunter, a muzzle brake and a scope were all that I was going to do. An aftermarket stock was not even on my wish list. Oddly enough, a Bell & Carlson Medalist/Varmint stock was the first thing I did, then I put a scope on. Still no muzzle brake and I have about 160 rounds thru it and I just love shooting this gun. The stock makes a big difference. The gun started out stock at 7 ½ pounds, it now weighs 12 pounds. Takes up a tad bit of the recoil.

http://www.pbase.com/wingspar/image/159470803/original.jpg


Nice looking HH

[ooghost1oo]

Hey, I've got a new Hog Hunter coming in, and I thought that having no box mag would just be a fact of life.

So many of you HH guys replacing stocks, modding magwells to accept (insert acronym here), and throwing around lots of abbreviated lingo, bottom metal, etc.--would someone please take a minute to describe to a noob HH modder what I need to know about transitioning from a normal stock to a stock with a mag? Do you guys fit the HH aftermarket stocks for different KINDS of mags? Anyone have one that just takes AR-10 mags? I'm here to soak up your knowledge about this concept.

[2scars]

Do the HH come in Lefty?

[jpdown]

- Savage Hog Hunter 30 Win.
- Savage SA, CF, DBM factory hardwood stock refinished in Duracoat drab olive and Krylon black lava webbing
- Muzzle brake - www.muzzlebrakesandmore.com
- Savage OEM bottom metal; new style trigger guard and SA DBM frame assembly
- Dark Eagle Custom Inc., 10-R magazine
- Small 1" grind-to-fit Pachmayr Decelerator 1"
- Weaver Grand Slam steel bases (S46, S402)
- Burris 30mm Signature Zee rings
- Sightron S-TAC 3-16x42mm scope

http://i1027.photobucket.com/albums/y333/jpdowns54/PICT0005_zpsvsfglawi.jpg (http://s1027.photobucket.com/user/jpdowns54/media/PICT0005_zpsvsfglawi.jpg.html)

[Lorenzo]

- Savage Hog Hunter 30 Win.
- Savage SA, CF, DBM factory hardwood stock refinished in Duracoat drab olive and Krylon black lava webbing
- Muzzle brake - www.muzzlebrakesandmore.com (http://www.muzzlebrakesandmore.com)
- Savage OEM bottom metal; new style trigger guard and SA DBM frame assembly
- Dark Eagle Custom Inc., 10-R magazine
- Small 1" grind-to-fit Pachmayr Decelerator 1"
- Weaver Grand Slam steel bases (S46, S402)
- Burris 30mm Signature Zee rings
- Sightron S-TAC 3-16x42mm scope

http://i1027.photobucket.com/albums/y333/jpdowns54/PICT0005_zpsvsfglawi.jpg (http://s1027.photobucket.com/user/jpdowns54/media/PICT0005_zpsvsfglawi.jpg.html)


Nice job thats a great looking gun.

[Lorenzo]

ive been eyeing a .223 hog hunter for awhile now, going to make it happen soon unless i find a deal on a tikka varmint.
I really wish bell and carlson would make this stock for savages, I emailed them and they said no plans but check back on the first of the year.
https://www.bellandcarlson.com/index.cfm?fuseaction=category.display&category_ID=1118
A HH in one of these stocks would be **** near perfect for what Im looking for, not really wanting to shell out the dough for a Mcmillan yet.