Need help in locating a 20 moa base for an older 110

[srqsteve]

I have a Savage 110 FP and am trying to buy a 20 moa base for this rilfe; any suggestions? It has rounded receiver at front and rear is flat. Any suggestions?

[LanceS4803]

EGW
I just put one on my 116.
I wish it had an integral recoil lug, but EGW has about the only reasonably price mount around.

[rdog52]

Try Warne. Not cheap, but a good base.

[Joetinva]

Use Burris signature rings and get the 20 MOA with the inserts.

[bootsmcguire]

Use Burris signature rings and get the 20 MOA with the inserts.

+1

I like this option myself. Gives you more flexibility for later on down the road if you wanna change it up or decide you don't need the extra 20 MOA, and the rings will transfer from gun to gun if that is needed later. Also by using the rear ring to add the desired amount of elevation, if there is a windage alignment issue with your rifle you can change rings in the front ring and used different sized inserts to correct that by installing them sideways.

Most flexible option IMHO.

That said, I would do as mentioned above and look to EGW if you just want the base. Happy shooting.

[GaCop]

The EGW base is made for old and new Savages and you can order directly from their web site.

[BoilerUP]

Burris XTR two piece bases and Sig Zee rings and inserts is a good option for non-hard use