Bedding job for non savage rifle

[Remingtonman]

Im getting ready to bed one of my non savage rifles and my question is do I bed just the recoil lug area and the rear tang area of the stock or should I just bed the whole action from the recoil lug on back? I have seen many people it do it both ways and I was wondering what the best way to do it is, for optimum accuracy? Thanks in advance

[limige]

The biggest thing your looking for is bedding from the lug to the rear action screw. I hear remingtons generally bed the tang where savages like it floated.

[thomae]

If you are willing to share what model/brand of rifle you wish to bed, you might get a response from someone here who has bedded the same or the same type of rifle/stock.

[Remingtonman]

It is a Ruger m77 Mark II in 7mm rem mag. Im looking on more info on how to pillar bed it. Im good to go with the glass bedding of the action.

[short round]

Ernie The Gunsmith web site has good information, but does not cover Ruger, at web site look under Gunsmith, odds & ends. There is info on you tube, for Ruger.