View Full Version : Opening a barrel channel?
John1
03-29-2014, 07:23 PM
Not sure if this was the place to ask but what would be the best tool to relieve the barrel channel on a laminated stock?
It's not going to take much, just a little in front of the chamber.
Thanks, John.
scope eye
03-29-2014, 07:31 PM
Sand paper flapper wheel, that is what I use.
Dean
Sand paper wrapped around a wooden dowel or deep socket. Seal with Brichwood Casey stock seal or outdoor polyurethane.
barrel-nut
03-29-2014, 09:33 PM
The sandpaper flapper wheel sounds like a good idea. I've used 40 grit sandpaper around a 1" wooden dowel with good results. http://img.tapatalk.com/d/14/03/30/jajudugy.jpg
Elgin
03-30-2014, 03:58 PM
I like to use the sockets, just because they have some heft, and I can easily vary the diameter depending on how much I need to open the channel.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.