Where to find high capacity magazines for Model 11 .243

[mark74okc]

Greetings, New member here! Does anyone know where I can find High Capacity magazines 9 or 10 rounds it seems for the Savage Axis model 11 .243. I have looked all over the internet and can not seem to find any. I am new to the savage and hunting rifles in general.
I have seen a few that I thought would work but the language was a bit confusing and misleading on if it would fit or not. Any help would be great!

[the Ranger]

is it an Axis or a model 11? it can't be both. that might be one source of your confusion.

[bootsmcguire]

Perhaps the OP is referencing the fact that most of the package 11 (XP's) use the same plastic bottom "metal" system as the Axis.

In either case I am unaware of any High Cap mags for that magazine system.

[Hotolds442]

Perhaps the OP is referencing the fact that most of the package 11 (XP's) use the same plastic bottom "metal" system as the Axis.
In either case I am unaware of any High Cap mags for that magazine system.

They're out there, but not widely available. There are people on this website making them, I have one for the Axis in 308, it holds 10 rounds and would work just fine with a 243.

[Elgin]

Yep, there was another thread about these within the last few months. There's a guy out there that is making them for 223, and I believe he's working on a 308 (which would work for 243).

PM coming.

[mark74okc]

ahh ok well thank you for the information! As I said I am new to the Savage arms line up and thought this was an Axis. I guess it is just a model 11 .243 My bad. I was originally I guess looking at an axis a while ago and I thought this was an axis as well. I am learning more and more about the Axis every day. I heard good reviews about the model 11, and the axis as well. I went in thinking of buying an Axis and came out with a Model 11. Not sure which is really better. but Either way I am happy. Now I am just ready to try and start modding it.

[bootsmcguire]

They're out there, but not widely available. There are people on this website making them, I have one for the Axis in 308, it holds 10 rounds and would work just fine with a 243.

Huh, I knew there were guys doing for the "Metal" bottom metal but not the plastic style. Learn something everyday.


ahh ok well thank you for the information! As I said I am new to the Savage arms line up and thought this was an Axis. I guess it is just a model 11 .243 My bad. I was originally I guess looking at an axis a while ago and I thought this was an axis as well. I am learning more and more about the Axis every day. I heard good reviews about the model 11, and the axis as well. I went in thinking of buying an Axis and came out with a Model 11. Not sure which is really better. but Either way I am happy. Now I am just ready to try and start modding it.

So since you have a Model 11, I guess now the question is do you have a metal bottom plate on your DBM magazine or a plastic bottom plate?

[Hotolds442]

Huh, I knew there were guys doing for the "Metal" bottom metal but not the plastic style. Learn something everyday.


Yup!
http://i1276.photobucket.com/albums/y471/chevypowrd/Rifles/aba0ec64f0e8e13dcf9e866581195565_zps337a2169.jpg

[johnnyav]

​http://www.snydermags.com/products.html