stainless BAS without cocking indicator

[autodidact]

I would like to try the bolt lift mod on my Model 16.

Am I correct in assuming that I can replace my BAS and firing pin assembly with the old style parts and have a bolt suitable for the 38SPL + bearing bolt lift mod?

Assuming this is feasible, I have searched without success for a non-cocking indicator BAS in stainless. Does someone have a model number that came from the factory with such. Or better yet, the actual part number for the stainless BAS?

JB

[drybean]

you will have to change the firing pin assembly, the cocking piece sleeve& the BAS
just bought 2 stainless BAS from Numrich arms, they should have the cocking sleeves also
when installing a bolt lift kit, measure your cocking piece sleeve with the lift kit on it,
then cut that amount off of your BAS

drybean

[Hotolds442]

Stainless BAS part #102522. That's the hex head non cocking indicator version

[autodidact]

just bought 2 stainless BAS from Numrich arms

I would greatly appreciate your sharing the Numrich product number. I am having difficulty determining which is the one without the cocking indicator hole.

Thanks,
JB

[autodidact]

Stainless BAS part #102522. That's the hex head non cocking indicator version

Thanks. Just what I needed.

JB