COplains
01-20-2014, 02:45 PM
Has anyone tried or have any first hand experience with the Lucid scope? The new "Cross-Over" looks promising although it still has the 1/8 MOA turret adjustment. I'm looking to put this on a 110GXP Wood Stock 7mm RM. Mouting dimensions for the scope are 5.5" useable area for the rings...I have a EGW 20MOA rail coming so that should not be a problem to fit up with the long action.
Just as a side note....while Savage is not known for exceptional wood stocks, this one (picked up used about 3 wks ago) not only looks great with a little clean up but the fit is really great. The rifle has the 24" sporter bbl that I will eventually swap out for a larger one so that I can mount a muzzle break. The current muzzle dia is 0.550" and too small to thread on a break. I'm hoping to find a barrel large enough for the break, but not so large I can't sand the stock to fit and run out of wood. Synthetic stock will probably come someday but for now, I like the looks of the rifle as is.
Thanks for any information you can offer. kb
Just as a side note....while Savage is not known for exceptional wood stocks, this one (picked up used about 3 wks ago) not only looks great with a little clean up but the fit is really great. The rifle has the 24" sporter bbl that I will eventually swap out for a larger one so that I can mount a muzzle break. The current muzzle dia is 0.550" and too small to thread on a break. I'm hoping to find a barrel large enough for the break, but not so large I can't sand the stock to fit and run out of wood. Synthetic stock will probably come someday but for now, I like the looks of the rifle as is.
Thanks for any information you can offer. kb